Commercial Door Repairs & Replacements Adelaide

Commercial doors work harder than almost any other door. They are opened hundreds of times, exposed to weather, pushed by trolleys, slammed by closers and relied on for security every day. When something starts to fail, the problem can quickly affect access, security and the operation of the building.

Statewide Trade Services provides commercial door repairs and replacements across Adelaide for aluminium, timber, glazed and steel-framed door systems. We repair existing doors where practical, replace damaged components and can supply complete new door and frame systems when the existing opening has reached the end of its useful life.

From a sticking aluminium entrance door through to damaged double Colorbond doors, broken commercial hardware or an emergency exit that needs new latch hardware, we can assess the complete opening rather than simply replacing the first failed component.

Need a commercial door inspected or repaired? Call Statewide Trade Services on (08) 8250 7474.

Complete Commercial Door Repair Services

A commercial door is a system. The door leaf, frame, hinges, pivots, closer, latch and surrounding structure all need to work together. Therefore, replacing one part without finding the cause of the problem can lead to the same failure happening again.

We inspect how the door is sitting in the frame, where it is binding, how the hardware is operating and whether movement or damage has occurred around the opening. Depending on the condition, repairs can include:

• Commercial aluminium door repairs and adjustments
• Timber commercial door repairs and replacements
• Aluminium-framed glass door repairs
• Steel door and steel frame repairs
• Double commercial door repairs and replacements
• Colorbond-clad commercial door replacements
• Door frame repairs and complete frame replacement
• Hinge, pivot and fixing repairs
• Commercial door closer replacement and adjustment
• Locks, latches, handles and pull-handle replacement
• Emergency exit latch installations
• Push bar and exit hardware installations
• Flush bolts, drop bolts and double-door hardware
• Door seals, weather strips and thresholds
• Kick plates, protection plates and door stops
• Realignment of doors that drag, bind or fail to latch
• Emergency make-safe work following damage or forced entry

Commercial Aluminium Door Repairs

Aluminium-framed doors are common in shops, offices, medical buildings, commercial entries and other high-traffic properties. However, once the frame moves or the pivots and hardware begin to wear, even a small amount of movement can stop the door from closing correctly.

For example, an aluminium door may appear to need a simple closer adjustment when the real issue is movement within the door frame. Likewise, worn pivots or loose frame sections can allow the glass door to drop until it catches on the threshold.

Where possible, we repair and realign the existing assembly. This may involve removing glazing rubbers where required, realigning frame sections, repairing fixings, adjusting pivots and resetting the door before the glazing components are reinstated.

If the existing door or frame is too damaged to provide a reliable repair, we can instead arrange a replacement commercial aluminium door system suited to the opening.

Commercial Timber Door Repairs & Replacement

Timber doors remain widely used throughout Adelaide commercial properties. Solid-core doors are particularly useful where a stronger door is needed for regular use. However, moisture, impact damage, failed hinges and repeated closing forces can eventually damage both the door and frame.

We can replace damaged commercial timber doors while assessing whether the existing frame and hardware can be retained. As a result, a complete replacement is not always necessary.

Where the frame has deteriorated, we can also replace damaged jamb sections, door stops or the complete frame before hanging the new door and fitting the required hardware.

Door finishes can then be coordinated with surrounding building maintenance or commercial carpentry services where additional timber repairs are required.

Commercial Glass Doors & Glazed Aluminium Entrances

A glazed commercial entrance needs to close smoothly without the glass or aluminium assembly being placed under unnecessary stress. Therefore, problems such as scraping, twisting, failed pivots or a door that suddenly becomes difficult to close should be investigated rather than continually forcing the door.

We work on aluminium-framed glazed doors and can coordinate the associated components needed to return the opening to reliable operation. That can include frame alignment, pivots, hinges, locks, closers, seals and associated door furniture.

Most importantly, the complete opening is checked so the replacement hardware is not compensating for a door that is already out of alignment.

Double Colorbond & Steel-Framed Commercial Doors

Some commercial and industrial openings need something stronger than a standard timber door. Double doors, service entrances and rear commercial access points are often exposed to weather, impacts and heavier use.

For these openings, we can construct or replace double Colorbond-clad doors, steel-framed door assemblies and heavy-duty commercial entrances. Depending on the existing construction, work can include steel frame repairs, new door leaves, cladding, edge protection and new commercial hardware.

Similarly, damaged steel door frames can sometimes be repaired without replacing the complete opening. Where corrosion, distortion or previous damage is too extensive, replacement may provide a better long-term result.

Push Bars & Emergency Exit Hardware

Emergency exit doors have a different job from a normal storeroom or office door. They need hardware suited to the intended function of the opening while still allowing the building to remain secure from the external side where required.

We can install and replace push bars, emergency exit latches, panic-style exit hardware and associated commercial door furniture.

Before hardware is selected, we consider the door construction, handing, frame condition and how the opening is intended to operate. In addition, where the doorway forms part of a regulated exit path, the proposed hardware needs to suit the applicable requirements for that opening.

Older doors may also need repairs before new exit hardware can operate correctly. Therefore, we do not simply bolt new equipment onto a badly twisted or misaligned door and consider the problem solved.

Commercial Door Hardware Replacement

Hardware failure is one of the most common reasons a commercial door stops working properly. Because commercial doors receive far more use than a typical residential door, components need to be selected for the workload.

We repair and replace door closers, hinges, pivots, commercial handles, locks, latches, pull handles, flush bolts, drop bolts, seals, door stops and related components.

For double doors, the inactive leaf may also rely on flush bolts or drop bolts to hold the opening correctly. If these components loosen or become damaged, the entire pair of doors can move and the active leaf may stop latching.

Similarly, repeatedly adjusting a closer will not fix a door that has dropped on its hinges. We first identify why the door is failing and then repair the underlying problem.

Door Closers That Slam, Stop or Won’t Shut

A commercial door closer should control the door through its closing cycle while still allowing the latch to engage correctly. However, worn closers, incorrect adjustment, poor mounting positions and door alignment problems can all affect operation.

Typical problems include doors slamming shut, stopping before they latch, closing too slowly, hitting adjoining walls or pulling against damaged hinges.

Depending on the cause, we can adjust the existing closer, reposition hardware where practical or install a replacement closer suited to the door.

Common Commercial Door Problems We Fix

A door rarely fails without giving some warning. Early repairs can often prevent damage spreading into the frame, hardware or surrounding structure.

Common problems include doors dragging on the floor, failing to latch, dropping out of square, rubbing against frames, damaged hinges, loose aluminium sections, broken handles, failed locks, leaking external doors and doors that slam because the closer is no longer controlling them.

Impact damage is another frequent issue in warehouses, loading areas and busy commercial properties. In these cases, the door leaf may be damaged while the frame remains serviceable. On the other hand, a strong impact can twist both components. We assess both before recommending repair or replacement.

Repair the Door or Replace It?

Replacement is not automatically the best answer.

If the door leaf and frame remain structurally sound, repairing hinges, pivots, closers or alignment can be far more economical. However, repeatedly repairing a severely twisted, water-damaged, corroded or impact-damaged assembly can become false economy.

We look at the condition of the door, frame and hardware together. Therefore, you receive a practical recommendation based on what is likely to provide the better long-term result.

Where broader work is required around the opening, our commercial building repair services can also address surrounding damage rather than leaving separate trades to complete each part of the job.

Commercial Door Replacement

When repair is no longer practical, we can remove the existing door and replace it with a new system suited to the property and expected level of use.

That may involve a straightforward replacement door into an existing frame. Alternatively, the entire door and frame assembly may need to be removed and rebuilt.

Depending on the opening, replacement options can include solid-core timber doors, aluminium-framed doors, glazed commercial doors, steel-framed assemblies and Colorbond-clad double doors.

Existing hardware can sometimes be reused where it remains suitable and serviceable. Otherwise, new hardware can be installed as part of the replacement so the finished door operates as one complete system.

Commercial Doors Need to Handle Daily Abuse

Commercial doors are exposed to different conditions from residential doors. Shopping trolleys, delivery equipment, customers, staff, wind pressure and repeated opening cycles all place stress on the hardware.

Adelaide’s hot summers can also contribute to movement between materials, while exposed exterior doors must deal with rain, UV and temperature changes. Therefore, external door materials, seals, coatings and hardware should be chosen with the location in mind.

Most importantly, a replacement should suit how the building is actually used rather than simply matching the dimensions of the old door.

Commercial Properties We Work On

Our commercial door work covers offices, shops, shopping centres, cinemas, warehouses, workshops, medical facilities, hospitality venues, body corporate properties, schools and other commercial buildings across metropolitan Adelaide.

Because door failures can also occur alongside other property issues, Statewide Trade Services can coordinate the door work with wider commercial building maintenance in Adelaide.

This is particularly useful where a damaged entrance also needs wall repairs, carpentry, painting or other building maintenance after the new door is installed.

Why Use Statewide Trade Services for Commercial Doors?

Commercial door repairs need more than a parts-changing approach. The cause of the failure matters.

We assess the door, frame and hardware as one assembly. As a result, problems such as dropped doors, loose frames and incorrect closer operation can be addressed before new components are installed.

In addition, our broader building experience allows us to deal with surrounding structural and finishing work where required. For general door information, you can also view our complete Adelaide door services.

Book a Commercial Door Repair in Adelaide

Whether you have one faulty shopfront door or multiple commercial doors requiring repair, adjustment or replacement, Statewide Trade Services can assess the opening and recommend a practical solution.

We handle aluminium doors, timber doors, glass doors, steel frames, double Colorbond doors, push bars, emergency exit latches, closers, locks and general commercial door hardware.

Call Statewide Trade Services today on (08) 8250 7474 to arrange your commercial door repair or replacement in Adelaide.

Commercial Door Repairs – Frequently Asked Questions

Can you repair commercial aluminium glass doors?

Yes. We can inspect aluminium-framed glazed doors for alignment problems, failed pivots, loose frame sections, closer problems and damaged hardware. Where the existing assembly remains serviceable, repair and realignment may avoid complete replacement.

Can you install push bars and emergency exit latches?

Yes. We can install or replace push bars, emergency exit latches and associated commercial door hardware. The door, frame, handing and intended function of the opening are assessed before the hardware is selected.

Do you replace complete commercial doors and frames?

Yes. Where the existing door or frame is too damaged for a reliable repair, we can replace the door leaf, frame or complete assembly. Options can include timber, aluminium, glazed, steel-framed and Colorbond-clad commercial door systems.

Can you repair commercial double doors?

Yes. Double doors can develop problems with hinges, alignment, flush bolts, drop bolts, closers and the meeting point between the two leaves. We can repair the hardware and alignment or replace the doors where necessary.

Can you attend damaged commercial doors that need to be secured?

Yes. Where a commercial entrance has been damaged, we can assess make-safe options and carry out temporary or permanent repairs depending on the condition of the door and frame. Call (08) 8250 7474 to discuss the problem.